The CC60 Features and Specifications:

• Nargesa 4.0 Technology

• Stores up to 10,000 programs.

• Side shelving to store tools.

• Safety pedal to the right and left.

• Quick Die Change Over: Maximum 60 Seconds.

• Automatic and programmable spring back correction.

• Dimensions can be programmed in inches or millimeters.

• Two bending directions, right or left for easier bending.

• Up to 50 different angles on the same piece can be programmed.

• Pivot system with automatic unlocking to help remove material.

• All bend dies are made of tempered steel for longer tool life.

• CNC control with 7” touchscreen with more than 20 different languages.

• Reinforcement tool post support arm for pipes with diameters over 1.5" (40mm) included.

• The counter dies are made of bronze alloys to help prevent markings on the outside of the bent profiles.

Robustness and Speed

The weight of the machine in comparison to other brands provides an idea of how it’s built. Some of our units are almost double in weight than our competitors. These are not DIY machines; they’re pipe benders that can work 24 hours a day. Made of robust materials, which are tempered in areas subject to wear, and activated with a helical-cut pinion planetary gear system. The rotation speed is also something to be taken into account. It can reach 4.5 RPM for more aggressive production; in many cases, more than twice as much when compared to similar machines in today’s market.

Curve Thicknesses and Finishes

Most tube & pipe benders can only bend very thick-walled pipes with a 10% minimum thickness of the diameter of the pipe normally calculated. For example, a good curve on a 40 mm pipe is usually guaranteed with a 0.13" / 3.5mm or 0.15" / 4mm wall thickness. The original counter-shape designed by Nargesa guarantees a good finish even with a thin-walled pipe. The minimum thickness for a 1.5" / 40mm pipe can be 0.060" / 1.5mm or 0.080" / 2mm. This significantly lowers raw material cost.

Offset Head and Two-Directional Bending

The offset head design allows for complex curves as the pipe goes underneath the head. Bending pipe below the head is not possible with some pipe bender models. The all-new CC60 and CC90 benders can curve to the right and left without needing to rotate the die, meaning any piece can be bent regardless its complexity.

Enhanced Energy Efficiency

The CC60 elbow bender can be connected to 110 V or 220 V single phase voltage so it can be taken to a worksite, if necessary, and be connected to a simple outlet. The consumption per machine working stroke has been significantly reduced to save energy. Only 1.1 Kw with a working stroke of up to 2.37" / 60.3mm.

Bend 8 Lubricant (Included)

With the purchase of the CC60 CNC pipe bender, you’ll receive a 400 ml bottle of special bending lubricant: for a better finish on the outside of the curve, to prevent roughness and inner corrugation and reduce wear on the counter-shape die. Lubricates to reduce friction. Prevents and dissolves corrosion. Polishes and protects

The CC Series ESA S625 Control Panel

Nargesa tube and pipes benders are controlled with a very intuitive and easy-to-use 7” color touchscreen with the latest 4.0 technology. Just enter the pipe dimensions, thickness, angle of the curve or curves and choose a die from the library and the control programs the rest of the parameters automatically; elastic recovery correction (springback), recommended rotation speed, whether a tool post support is necessary or not, and if the intended curve is possible... All of this may be modified by the end user based on their own needs. These are some of the most relevant features of this control system.

Schedule 40 Pipe Tooling (3/8”- 1-1/4”)

Main Roller: made of highly resistant steel which has been thermally hardened with carbonitriding for 50-54 HRC hardness; this roller guide perfectly adapts to the pipe for excellent results.
Counter-Shape: designed by the Nargesa R+D department which reduces friction and ensures optimal curving. It’s made of a highly resistant aluminum bronze alloy and mechanized in 3D.
Clamp with a Fastener: to firmly secure the material during the bending process.

CC60 2-Axis Positioning Carriage
(REF: 140-17-01-50000)

The gauge of the CC60 allows to make mass produced parts, much faster, more accurate and repetitively.

• Adjustable longitudinal positioning with 6 positions

• Angular head rotation every 5 degrees

• Four-clamp plate adjustable to round and square tube

• Longitudinal movement with high precision linear guides

• Automatic anti-collision control

• Easy handling and preparation for difficult parts.